m www.vishay.com vishay dale thin film revision: 28-sep-12 1 document number: 60031 for technical questions, contact: thinfilm@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 high reliability thick film resistor, surface mount chip utilizing proven expertise in thick and thin film resistors to satisfy your manufactur ing needs, vishay provides a high rel chip with the same reliability and stability found in military grade resistors. these chips are available in the widest range of sizes, values, and pe rformance characteristics. and manufactured on the mil-prf-55342 qualified controlled production line all product is 100 % electrical tested for tolerance and after thermal shock testing and typically meet the requirements of grou p a in mil-prf-55342 performance. construction features ? high purity alumina substrate for high power dissipation (2 w max.) ? wraparound terminations featuring a thin film adhesion layer covered with a leach resistant nickel barrier layer for + 150 c operating conditions ? high speed laser trimming for high volume requirements ? ruthenium based cermet th ick film for dependable performance ? fired-on glass passivation ? tape and reel packaging standard; static-free waffle pack available ? active trim and 0 ? chips ? sulfur resistant (per astm b809-95 humid vapor test) ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 note ? * lead (pb)-containing terminations are not rohs-compliant. ? exemptions may apply. typical performance notes ? consult factory for nominals above 25 m ? (1) 0705 and 0805 are the same (onl y use 0805 when ordering) actual s ize 0502 re s i s tor overglaze alumina s ub s trate inner electrode nickel barrier plated s older absolute tcr 100 tol. 1 standard electrical specifications test specifications conditions material ruthenium - resistance range 10 ? to 25 m ? - tcr: absolute 100 ppm/c to 300 ppm/c - 55 c to + 125 c tolerance: absolute 1 % to 10 % - stability: absolute ? r 0.15 % - stability: ratio -- voltage coefficient -- working voltage 25 v to 200 v - operating temperature range - 55 c to + 125 c - storage temperature range - 55 c to + 150 c - noise < - 35 db (typical) - shelf life stability: absolute -- component ratings case size (1) power rating (mw) working vo ltage (v) resistance range ( ? ) 0402 100 25 10 to 10m 0502 100 25 10 to 25m 0504 125 40 10 to 25m 0505 125 40 10 to 25m 0603 150 40 10 to 25m 0705 200 50 10 to 25m 0805 200 50 10 to 25m 1005 250 75 10 to 25m 1010 500 75 10 to 25m 1206 330 100 10 to 25m 1505 350 100 10 to 25m 2010 1000 175 10 to 25m 2208 750 150 10 to 25m 2512 2000 200 10 to 25m
m www.vishay.com vishay dale thin film revision: 28-sep-12 2 document number: 60031 for technical questions, contact: thinfilm@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) 0705 and 0805 are the same (o nly use 0805 when ordering) dimensions in inches case size term l w t d e 0402 b 0.042 0.006 0.022 0.005 0.010 to 0.033 0.010 0.005 0.010 0.005 0502 b 0.055 0.005 0.025 0.005 0.020 max. 0.010 0.005 0.015 0.005 0504 b 0.055 0.005 0.040 0.005 0.020 0.005 0.010 0.005 0.010 0.005 0505 b 0.055 0.006 0.050 0.005 0.012 to 0.033 0.010 0.005 0.015 0.005 0603 b 0.064 0.006 0.032 0.005 0.010 to 0.033 0.012 0.005 0.015 0.005 0705, 0805 (1) b 0.080 0.006 0.050 0.005 0.015 to 0.033 0.015 0.005 0.015 0.005 1005 b 0.105 0.007 0.050 0.005 0.015 to 0.033 0.020 0.005 0.020 0.005 1010 b 0.105 0.007 0.100 0.005 0.015 to 0.033 0.015 0.005 0.015 0.005 1206 b 0.126 0.008 0.063 0.005 0.015 to 0.033 0.020 + 0.005/- 0.010 0.020 + 0.005/- 0.010 1505 b 0.155 0.007 0.050 0.005 0.015 to 0.033 0.020 0.005 0.020 0.005 2010 b 0.197 0.006 0.098 0.005 0.015 to 0.033 0.015 0.005 0.015 0.005 2208 b 0.230 0.007 0.075 0.005 0.015 to 0.033 0.015 0.005 0.015 0.005 2512 b 0.250 0.006 0.124 0.005 0.015 to 0.033 0.020 0.005 0.020 0.005 environmental tests environmental test 10 ? ? r (%) 100 k ? ? r (%) thermal shock 0.02 0.03 short term overload 0.02 0.02 low temperature operation 0.03 0.04 resistance to solder heat 0.06 0.02 moisture resistance 0.10 0.08 high temperature exposure 0.02 0.02 derating curve d w l t e ambient temperature c 070125150 0 20 40 60 80 100 precent of rated power
m www.vishay.com vishay dale thin film revision: 28-sep-12 3 document number: 60031 for technical questions, contact: thinfilm@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) preferred packaging code global part number information new global part nu mbering: m-1206k5001gbt1 global model case size tcr characteristic resistance tolerance termination packaging m- = high rel ? cermet ? thick film ? wraparound 0402 0502 0504 0505 0603 0805 1005 1010 1206 1505 2010 2208 2512 k = 100 ppm/c ? m = 300 ppm/c ? x = 0 ? jumper first 3 digits are significant figures and the last digit specifies the number of zeros to follow. r designates the decimal point. ? ? example: ? 10r0 = 10 ?? 1002 = 10 k ? f = 1 % ? g = 2 % ? j = 5 % ? k = 10 % ? ? n = not ? trimmed b = wraparound ? tin/lead plated ? solder ? s = wraparound ? lead (pb)-free ? plated solder ? g = epoxy bondable bs = bulk ? 100 min., 1 mult ? ws = waffle ? 100 min., 1 mult ? ? tape and reel ? t0 = 100 min., 100 mult ? t1 = 1000 min., 1000 mult (1) ? t3 = 300 min., 300 mult ? t5 = 500 min., 500 mult ? tf = full reel ? ts = 100 min., 1 mult historical part number example: m0505k1003jbt (for reference purposes only) m 0505 k 1003 j b t style case size tcr characteristic ohmic value tolerance termination packaging 06k5 01g 0 2 1 bt 1 m-
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
